Chapter 6. System Status
263
Password From 6 to 32 characters are allowed depending on the Account
Policy settings.
Confirm Password To be sure there is no mistake in the password, you are asked
to enter it again. The two entries must match.
Description Additional information about the user that you may wish to
include.
RFID The RFID field can be scanned to enter the RFID card number
with recommended RFID device.
Type There are three account categories: Administrator, Super User
and User.
The Administrators have full access to make changes within
the KVM over IP Matrix Manager, which includes adding and
removing Transmitters, Receivers, accounts, preferences,
and configuration settings.
The Super Users have access to the Receiver’s OSD menu
and can connect Channels and Profiles.
The Users can log in to Receivers to connect channels.
Status Status allows you to control the user’s account and access, as
follows:
Active provides the user with access and permissions as
granted.
Disable lets you suspend a user’s account without actually
deleting it, so that it can be easily reinstated in the future.
OSD Language Click the drop-down menu to select the language you want to
use during OSD sessions for this user. Options are: Chinese
(Traditional), Simplified Chinese, Japanese, German, Korean,
Russian, French, Spanish, and Portuguese.
OSD Hotkey Select the hotkey combination to call the Tool Bar function for
this user. The Tool Bar is used when accessing the computer
from the Transmitter or Receiver side.
Hotkey Mode Select the hotkey mode that is used to step up with the KE
Series device’s configuration. All operation begin with invoking
the hotkey mode. Options are : [Num Lock] [-] and [Ctrl] [F12].
Logout Timeout If there is no user input for the amount of time set with this
function, the user is automatically logged out. A login is
necessary before the KVM over IP Matrix Manager can be
accessed again. The default is 30 minutes.
Screen Blanker Set how many minutes the device waits when a session is idle
before turning off the display.
OSD Title Bar
Duration
When the accessing a port, the top left-hand corner will show a
title bar displaying the access mode and the device name.
Select how long you wish the title bar is to be displayed for, or
check Disable to not show any title bar.
Field Description
To Next Page
Loading...
