Chapter 6. System Status
229
Item Description
Basic Device Name: Enter a name for the Transmitter.
Description: Enter a description for the Transmitter.
Location: Use the drop-down menu to select a Location for the
device. Locations filter the Transmitters seen on the settings page.
Mode: Use the radio button to select how the Transmitter will be
installed and managed:
Select Extender mode for simple one-to-one (Transmitter to
Receiver) setups that are managed at the Receiver’s OSD
menu.
Select Matrix mode to manage devices and connections over
the LAN from the KVM over IP Matrix Manager. This mode is for
advanced administration of Transmitter and Receiver
connections configured within the KVM over IP Matrix Manager
Web GUI.
Enable Media: Select which source type the Transmitter can
stream: Video, Audio, USB and RS232.
Audio Input: Use this option to select the Transmitter’s audio
source signal: HDMI, Analog, or Auto. This setting should reflect
the audio setting configured on the computer.*
To Next Page
Loading...
