Chapter 1. Introduction
3
*Power redundancy via PoE requires power board version B01G or later (see
PoE Power Redundancy on page 75 for more details).
KVM over IP Extenders allow flexible setup as they can make console-to-
computer connections in several ways: one-to-one (Extender mode), one-to-
many (Splitter mode), many-to-one (Switch mode), or many-to-many (Matrix
mode).
The KVM over IP Matrix Manager (CCKM) allows you to define the
aforementioned matrix connections and manage KE Extenders with features
such as auto-detection of KE Extenders, username/password authentication,
switching and sharing of connections, scheduling, permissions and more.
Whether you're extending computer access for Monitoring, Broadcasting,
Editing or Workstation setup, the KVM over IP Matrix System gives you the
flexibility and control to manage one or hundreds of extended connections. For
more detailed feature list, refer to Features on page 4.
Note: The SFP module is sold separately. You can choose the 2A-136G, a
multi-mode SFP module that provides 1 GbE connectivity up to 550
meters; or the 2A-137G, a single-mode SFP module that provides 1 GbE
connectivity up to 10 kilometers. Visit ATEN's website or contact your
ATEN dealer for more information.
KE8952 - 1 - 1 - 1
KE9900ST - - 1 - - -
KE9950 - - 1 - 1 1
KE9952 - - 1 1 - 1
Models
DVI HDMI DisplayPort
Power Redun-
dancy via PoE*
Power Redun-
dancy via Second
Power Jack
Network Failover -
SFP
To Next Page
Loading...
