Chapter 1. Introduction
5
Built-in ESD protection and surge protection
Supports 2 channel analog (KE69 Series) and 7.1 channel surround sound
(KE89 / KE99 Series) stereo speakers and microphone
Auto-MDIX — automatically detects cable type
Supports widescreen formats
Supports High-Quality Video streaming
Virtual Media Support
Hot pluggable
Rack Mountable
Upgradeable firmware
Supports digital audio (KE8900S / KE8950 / KE8952 / KE9900ST /
KE9950 / KE9952)
Adaptive Fast Switching — automatically fast switches between different
Tx video resolutions on a Rx display within 0.3 second (KE6910/KE6912)
Authentication Lock — automatically logs in when the power of the
system is resumed after power off
Connection Redundancy — automatically connects to another transmitter
(Tx) after disconnection with the original Tx, ensuring constant access to
servers (KE6900A / KE6900AiT / KE6910 / KE6912 / KE6920 / KE6922
/ KE6940A / KE6940AiT)
Disconnection Alert — Pop-up warning message and looping alarm
beeping notify users the disconnection status (KE6910/KE6912)
Instant Link — Switch intuitively and efficiently between transmitter (Tx)
on a receiver (Rx) display
Supports recording of remotely-accessed computer operations using
ATEN CCVSR Video Session Recording Software
“Push” and “Pull” — shares content instantly to/from a single Rx or video
wall by just one click
Video Walls — create multiple video walls with up to 8 x 8 (64 displays
max.) in each layout
Four selectable access modes for multiple simultaneous access (Exclusive/
Occupy/Share/ View only mode)
Supports remote access via WinClient / JavaClient over intranet or Internet
Rx access control — users at the Tx local console can enable / disable Rx
access by simply pressing a control button
4
To Next Page
Loading...
