Chapter 7. System Settings
289
1. Check Enable.
2. Fill in the IP addresses and service port of the Preferred RADIUS
Server and Alternate RADIUS Server.
3. In the Timeout field, set the time in seconds that the KVM over IP
Matrix Manager waits for a RADIUS server reply before it times out.
4. In the Retries field, set the number of allowed retries.
5. In the Shared Secret field, key in the character string that you want to
use for authentication between the KVM over IP Matrix Manager and
the RADIUS Server. A minimum of 6 characters is required.
6. On the RADIUS server, Users can be authenticated with any of the
following methods:
Use the same Username on both the RADIUS server and the
KVM over IP Matrix Manager.
Use the same Group name on both the RADIUS server and the
KVM over IP Matrix Manager.
Use the same Username/Group name on both the RADIUS server
and the KVM over IP Matrix Manager.
In each case, the user’s access rights are the ones assigned that were
assigned when the User or Group was created on the KVM over IP
Matrix Manager.
LDAP / AD Settings:
To Next Page
Loading...
