ATEN KE6900T - Page 400

KVM over IP Matrix System User Manual
376
The following table lists the available Set commands:
audioMCastEn Sets the enable multicast audio setting
Edid Sets the EDID mode selection setting
VideoType Sets the video type setting
ColorDepth Sets the color depth setting
BandwidthLimit Sets the bandwidth limit setting
VideoQty Sets the video quality setting
BGRefresh Sets the background refresh setting
Beeper Sets the beeper setting
OccupyTimeout Sets the occupy timeout setting
Resolution Sets the resolution setting
Value Description
=yy Set value to yy
yy: Enter a value that corresponds to
the control being used
Comm
and
Output Input Number Control Value Description
Set o i xx Name yy Set output or input xx
Name to yy
xx: Device ID or IP
address
yy: Name value
Set o i xx Description yy Set output or input xx
Description to yy
xx: Device ID or IP
address
yy: Description value
Set o i xx ipInstallerFlag yy Set output or input xx
ipInstallerFlag to yy
xx: Device ID or IP
address
yy: enable, viewonly,
disable
Control Description