5. Troubleshooting
Code 6061: “Board id: formatter red not accessable” (Error)
Situation Solution
Malfunction Formatter board of the
RED channel. T he projector can not
read from the installed Formatter
board of the RED channel.
Replace the Light Processor. See "HDF Light Processor", page 189.
Code 6062: “Board id: formatter red read error” (Error)
Situation Solution
Malfunction Formatter board of the
RED channel. T he projector can not
read from the installed Formatter
board of the RED channel.
Replace the Light Processor. See "HDF Light Processor", page 189.
Code 6063: “Board id: formatter red write error” (Error)
Situation Solution
Malfunction Formatter board of the
RED channel. T he projector can not
write to the installed Formatter board
of the RED channel.
Replace the Light Processor. See "HDF Light Processor", page 189.
Code 6064: “Board id: formatter green unknown format” (Warning)
Situation Solution
Old projector software installed.
The ID param eters of the Formatter
board of the GREEN c hannel are
written in a format which is not
known by the projector software.
Check if the v ersion o f the installed projector software is the latest available v ersion. T he
latest version can be downloaded from h
ttps://my.barco.com.
Formatter board of the GREE N
channel has invalid firmware.
Replace the Light Processor. See "HDF Light Processor", page 189.
Corrupt pr ojector s oftware. Reinstall the latest projector software.
Code 6065: “Board id: formatter green not accessable” (Error)
Situation Solution
Malfunction Formatter board of the
GREEN channel. T he projector can
not read from the installed Fo rmatter
board of the GREEN channel.
Replace the Light Processor. See "HDF Light Processor", page 189.
Code 6066: “Board id: formatter green read error” (Error)
Situation Solution
Malfunction Formatter board of the
GREEN channel. T he projector can
not read from the installed Fo rmatter
board of the GREEN channel.
Replace the Light Processor. See "HDF Light Processor", page 189.
Code 6067: “Board id: formatter green write error” (Error)
Situation Solution
Malfunction Formatter board of the
GREEN channel. T he projector can
not write to the installed F orm atter
board of the GREEN channel.
Replace the Light Processor. See "HDF Light Processor", page 189.
R5905312 HDF W SERIES 24/01/2013 51
To Next Page
Loading...
