5. Troubleshooting
Code 6068: “Board id: formatter blue unknown format” (Warning)
Situation Solution
Old projector software installed.
The ID param eters of the Formatter
board of the BLUE channel are
written in a format which is not
known by the projector software.
Check if the v ersion o f the installed projector software is the latest available v ersion. T he
latest version can be downloaded from h
ttps://my.barco.com.
Formatter board of the B LUE
channel has invalid firmware.
Replace the Light Processor. See "HDF Light Processor", page 189.
Corrupt pr ojector s oftware. Reinstall the latest projector software.
Code 6069: “Board id: formatter blue not accessable” (Error)
Situation Solution
Malfunction Formatter board of the
BLUEchannel. The projector can not
read from the installed Formatter
board of the BLUE channel.
Replace the Light Processor. See "HDF Light Processor", page 189.
Code 6070: “Board id: formatter blue read error” (Error)
Situation Solution
Malfunction Formatter board of the
BLUEchannel. The projector can not
read from the installed Formatter
board of the BLUE channel.
Replace the Light Processor. See "HDF Light Processor", page 189.
Code 6071: “Board id: formatter blue write error” (Error)
Situation Solution
Malfunction Formatter board of the
BLUE channel. The projector can
not write to the installed F orm atter
board of the BLUE channel.
Replace the Light Processor. See "HDF Light Processor", page 189.
Code 6072: “Board id: warp unknown format” (Warning)
Situation Solution
Old projector softwa re installed. Th e
ID parameters of the Warp board
are written in a format w hich is not
known by the projector software.
Check if the v ersion o f the installed projector software is the latest available v ersion. T he
latest version can be downloaded from h
ttps://my.barco.com.
Warp board has invalid firmware. Replace the Warp module. See "Replacing the Warp module", page 159.
Corrupt pr ojector s oftware. Reinstall the latest projector software.
Code 6073: “Board id: warp not accessable” (Error)
Situation Solution
Malfunction Warp board. The
projector c an not read from the
installed Warp board.
Replace the Warp board. See "Replac ing the Warp m odule", page 159.
Code 6074: “Board id: warp read error” (Error)
Situation Solution
Malfunction Warp board. The
projector c an not read from the
installed Warp board.
Replace the Warp board. See "Replac ing the Warp m odule", page 159.
Code 6075: “Board id: warp write error” (Error)
Situation Solution
Malfunction Warp board. The
projector can not write to the
installed Warp board.
Replace the Warp board. See "Replac ing the Warp m odule", page 159.
52 R5905312 HDF W SERIES 24/01/2013
To Next Page
Loading...
Need help?
General
