Branson 2000X - Page 215

2000X energy Power Supply Chapter 6: Operation
Instruction Manual Using the System Configuration Menu
011-003-991 EN 6-123
Turning the Digital Filter On or Off
NOTE
i
Branson recommends that you set the Digital Filter to On.
Take this action… To get this result…
Press the Select key that corresponds to
Digital Filter.
Press the Select key repeatedly to toggle
between On and Off. Press the Enter key
on the numeric keypad when you have set
Digital Filter to the value you want.
You will return to the Main Menu.
SYS CONFIG Pg18of19
Act Settings>
Bargraph Scales>
Digital Filter =On
Select
Select
Select
SYS CONFIG Pg18of19
Act Settings>
Bargraph Scales>
Digital Filter = Off
Select
Select
Select