6
Log out from Remote UI.
Press if the machine will not be used for a long period of time, such as overnight (for
models with the Ener
gy Saver key (
) only)
● Put the machine into sleep mode as a safety pr
ecaution.
● The machine does not enter sleep mode in the follo
wing cases:
- When the data indicator on the operation panel is lit or blinking
Operation Panel(P. 13)
-
When the [Menu] screen, a paper jam or other error message
*1
, or Direct Connection SSID or network key
display screen is displayed on the operation panel
- When the machine is performing an adjustment, cleaning, or other operation
- When the machine is communicating with a computer or similar device
- When a phone is connected, the handset is off the hook. (touch panel model)
- When the incoming fax ring is turned off (touch panel model)
*1
The machine may enter sleep mode depending on the message.
● If the machine is not allo
wed to enter sleep mode, it may perform auto calibration to maintain the image
quality. Performing calibration uses the toner cartridge, which may affect its lifetime.
Basic Operations
108
To Next Page
Loading...
