Smudge Marks Appear on the Edge of Printouts
94LS-0EH
T
roubleshoot by checking in the following order:
Are You Using Appropriate Paper?
● Check whether the paper in the machine is usable, and r
eplace it with appropriate paper, as needed.
Usable Paper(P. 20)
Loading Paper(P. 133)
Ar
e You Printing to the Edge of the Paper Without Margins?
This symptom may occur when the margin is set to none in the printer driver. To print with this machine, a
mar
gin of 1/4" (5 mm) (5/8" (15 mm) at the top and bottom and 3/8" (10 mm) on the left and right sides) is
required.
On the [Printing preferences] screen of the printer driver, congure the following setting to provide a margin.
[Finishing] tab [Advanced Settings] [Expand Print Region and Print] [Off]
Have You Cleaned the Fixing Assembly?
These symptoms may occur when the xing assembly is dirty
. In this case, clean the xing assembly.
Cleaning the Fixing Assembly(P. 468)
Troubleshooting
505
To Next Page
Loading...
