Canon imageCLASS MF273dw - Cleaning the Drum

Cleaning the Drum
94LS-0CK
If the printout is smudged, the drum may be dirty
. Clean the drum using the procedure below.
The drum cannot be cleaned when data is waiting to be printed.
Touch Panel Model(P. 469)
5 Lines LCD Model(P. 469)
Touch Panel Model
1
On the operation panel, press [Menu] in the [Home] screen.
[Home] Screen(P. 113)
2
Press [Adjustment/Maintenance] [Maintenance] [Clean Drum].
➠ The [Clean Drum] scr
een is displayed.
3
Press [Start].
➠ Cleaning is performed.
When cleaning is completed, the message [Finished.] appears, and then the [Maintenance] scr
een is
displayed.
5 Lines LCD Model
1
On the operation panel, select [Menu] in the [Home] screen, and press
. [Home]
Scr
een(P. 113)
2
Press [Adjustment/Maintenance]
[Maintenance] [Clean Drum] .
➠ The [Clean Drum] scr
een is displayed.
3
Select [Start], and press
.
➠ Cleaning is performed.
When cleaning is completed, the message [Finished.] appears, and then the [Maintenance] scr
een is
displayed.
Maintenance
469