Canon imageCLASS MF273dw - Changing the Fax Number and Unit Name

Changing the Fax Number and Unit Name
94LS-062
Y
ou can change the information registered to the machine such as when the fax number changes after a move or you
want to change the name notied to the destination.
This section describes how to congure the settings using Remote UI from a computer.
On the operation panel, select [Menu] in the [Home] screen, and then select [Function Settings] to congure the
settings.
[Set Line](P. 438)
Administr
ator privileges are required.
1
Log in to Remote UI in System Manager Mode.
Starting Remote UI(P. 350)
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of
Remote UI(P
. 352)
3
Click [TX Settings]
[Fax TX Settings] [Edit].
➠ The [Edit Fax TX Settings] scr
een is displayed.
4
Change the fax number and unit name.
● Enter the fax number in [Unit T
elephone Number] in [Set Line].
● Enter the unit name in [Unit Name] in [Basic Settings].
5
Click [OK].
➠ The settings ar
e applied.
6
Log out from Remote UI.
Faxing
225