Canon imageCLASS MF273dw - Disabling HTTP Communication

Disabling HTTP Communication
94LS-091
It is r
ecommended to disable HTTP communication when using only the USB connection or when not using functions
that require HTTP communication, such as Remote UI, WSD printing, and AirPrint.
This section describes how to congure the settings using the operation panel.
You can also congure the settings using Remote UI from a computer.
Managing the Machine from a Computer
(Remote UI)
(P. 349)
Administrator privileges are required.
Touch Panel Model(P. 345)
5 Lines LCD Model(P. 345)
Touch Panel Model
1
On the operation panel, press [Menu] in the [Home] screen.
[Home] Screen(P. 113)
2
Press [Preferences] [Network] [TCP/IP Settings] [Use HTTP].
➠ The [Use HT
TP] screen is displayed.
If the login screen appears, enter the System Manager ID and PIN, and then press [Log In].
System
Manager ID and PIN(P
. 5)
3
Press [Off]
[Yes].
5 Lines LCD Model
1
On the operation panel, select [Menu] in the [Home] screen, and press . [Home]
Scr
een(P. 113)
2
Press [Preferences]
[Network] [TCP/IP Settings] [Use HTTP]
.
➠ The [Use HT
TP] screen is displayed.
If the login screen appears, enter the System Manager ID and PIN, and then press
. System Manager
ID and PIN(P
. 5)
3
Press [Off]
[Yes] .
Security
345