Canon imageCLASS MF273dw - Securely Sending PC Faxes

Securely Sending PC Faxes
94LS-069
While sending fax
es from a computer can be convenient, there is a risk of sending it to an incorrect number. To reduce
this risk, it is recommended that you check the following when sending faxes.
Checking the Content You Are Sending(P. 236)
Conrming the Destination
(P. 236)
Conrming TX Job Log after Sending
(P. 236)
Checking the Content You Are Sending
Unlike when scanning a document and sending it, you can only check the content to be sent on the screen of the
computer. Therefore, check the content before sending the document.
Checking with Preview
Check that the content to be sent is as intended. If the paper size is not appropriate, part of the document
sticking beyond the paper may be divided and sent separately.
Checking with PDF
You can convert the document into a PDF and then send it to reduce the risk of sending unintended sheets in
an Excel le, for example. When you cannot preview the document with the print function of the application
or you want to send only certain pages of the document, you can check the content to be sent before
sending.
Conrming the Destination
Y
ou can require the user to enter the fax number twice when specifying a destination or require the user to conrm
the destination before sending to reduce the risk of sending a fax to an incorrect destination. For details about the
settings to conrm the destination, see the procedures when preparing to send PC faxes.
Step 2: Conguring the
Settings for Secur
e Sending(P. 221)
Conrming TX Job Log after Sending
When the machine is set to save a TX Job Log, you can check the log to conrm whether the intended content was sent
corr
ectly. For details about the settings to conrm the TX job log after sending PC faxes, see the procedures when
preparing to send PC faxes.
Step 2: Conguring the Settings for Secur
e Sending(P. 221)
Faxing
236