Canon imageCLASS MF273dw - Cleaning the Fixing Assembly

Cleaning the Fixing Assembly
94LS-0CJ
If the printout is smudged, the xing assembly may be dirty
. In this case, you can clean the xing assembly using
paper.
The xing assembly cannot be cleaned when data is waiting to be printed or a toner cartridge has reached the end of
its lifetime.
Required Preparations
● Check that ther
e is enough amount of toner remaining in the toner cartridge.
Checking the Remaining
Amount of Consumables
(P. 477)
Touch Panel Model(P. 468)
5 Lines LCD Model(P. 468)
Touch Panel Model
1
On the operation panel, press [Menu] in the [Home] screen.
[Home] Screen(P. 113)
2
Press [Adjustment/Maintenance] [Maintenance] [Clean Fixing Assembly].
➠ The available paper sizes and types ar
e displayed on the conrmation screen.
3
Check that available paper is loaded, and then press [Start].
➠ The paper is fed to the machine, and cleaning starts.
When cleaning is completed, a sheet of paper with a printed image (pattern) is output.
5 Lines LCD Model
1
On the operation panel, select [Menu] in the [Home] screen, and press
. [Home]
Scr
een(P. 113)
2
Press [Adjustment/Maintenance]
[Maintenance] [Clean Fixing
Assembly] .
➠ The available paper sizes and types ar
e displayed on the conrmation screen.
3
Check that available paper is loaded, and then press
.
➠ The paper is fed to the machine, and cleaning starts.
When cleaning is completed, a sheet of paper with a printed image (pattern) is output.
Maintenance
468