Printouts Have Ghost Images
94LS-0EK
T
roubleshoot by checking the following steps:
Step 1: Checking the Paper and Toner Cartridge(P. 508)
Step 2: Checking the Occurrence of Ghost Images(P. 508)
Step 3: Checking the Maintenance Status of the Machine(P. 509)
Step 4: Checking the Special Processing Setting(P. 509)
Step 1: Checking the Paper and Toner Cartridge
Are You Using Appropriate Paper?
Check whether the paper in the machine is usable, and replace it with appropriate paper, as needed.
Usable Paper(P. 20)
Loading Paper(P. 133)
Have the T
oner Cartridge Reached the End of Their Lifetime?
Parts inside the toner cartridge may have deteriorated. If this symptom occurs, it is recommended to replace
the toner cartridge r
egardless of the remaining amount of toner or messages displayed.
Replacing the
T
oner Cartridge(P. 471)
Step 2: Checking the Occurrence of Ghost Images
Do Ghost Images Appear in Unprinted Sections?
If you print on small-sized paper and then continue printing on a larger sized paper, ghost images may appear
in the unprinted sections of the paper. In this e
vent, setting [Reduce Ghosting 1] to [On] may improve the print
results.
Touch Panel Model
[Home] screen on the operation panel [Menu] [Adjustment/Maintenance] [Adjust Image Quality]
[Special Processing] [Reduce Ghosting 1] [On]
5 Lines LCD Model
[Home] screen on the operation panel [Menu] [Adjustment/Maintenance] [Adjust Image
Quality] [Special Processing] [Reduce Ghosting 1] [On]
* When you select [On], the printing speed may decrease.
Do Ghost Images Appear Within the Same Page?
Setting [Transfer Adjust. Mode] to [Mode 1] may solve the problem. If that does not work, select [Mode 2].
T
ouch Panel Model
[Home] screen on the operation panel [Menu] [Adjustment/Maintenance] [Adjust Image Quality]
[Special Processing] [Transfer Adjust. Mode] [Mode 1] or [Mode 2]
5 Lines LCD Model
Troubleshooting
508
To Next Page
Loading...
