Canon imageCLASS MF273dw - Maintenance

[Device Management]
94LS-0C4
Specify and manage settings for information and oper
ations relating to the machine’s hardware.
* Values in bold red text are the default settings for each item.
[Device Information Settings](P. 452)
[Select Country/Region](P. 452)
[Display Job Log](P. 452)
[Displ. Consmbls. Info (RUI/Toner Status)](P. 453)
[Scan with Canon PRINT Business](P. 453)
[Notify to Check Paper Settings](P. 453)
[Canon Genuine Mode](P. 453)
[Device Information Settings]
[Menu] [Management Settings] [Device Management]
Specify a name to identify the machine and the installation location.
The information specied her
e appears in the Remote UI Portal page.
Portal Page of Remote UI(P. 352)
[Device Name]
[Location]
[Select Country/Region]
[Menu] [Management Settings] [Device Management]
Specify the country or r
egion where the machine is used. The default setting may vary depending on the setting
selected at initial power-ON.
* Depending on your country or region, the [Select Country/Region] setting may not be available, or its content or
default setting may be different.
[United States (US)]
[Canada (CA)]
[Br
azil (BR)]
[Mexico (MX)]
[Panama (PA)]
[Other]
[Display Job Log]
[Menu] [Management Settings] [Device Management]
Specify whether the logs for printing and faxing ar
e shown on the Status Monitor screen and in the communication
management reports.
[Status Monitor] Screen(P. 116)
Checking Usage and Logs with Remote UI(P. 354)
Printing and Viewing Reports and Lists(P. 359)
[Off]
[On]
Settings Menu Items
452