Canon imageCLASS MF273dw - A Message Appears

A Message Appears
94LS-0HE
If a message appears on the oper
ation panel, select the message from the list below, and check how to troubleshoot
the problem.
Cannot analyze the authentication server certicate.(P
. 561)
Cannot change the destination type of any destination that is registered to a group.(P. 561)
Cannot nd the access point.(P
. 562)
Cannot print. A non-Canon or counterfeit cartridge may be in use. Close: Press OK(P. 562)
Cannot print RX data.(P. 562)
Cannot receive the fax. Make sure the fax was sent correctly by the sender.(P. 563)
Cannot send because more than one destination is specied.(P
. 563)
Cannot specify a group.(P. 563)
Cart. Comm. Error Cannot print. A non-Canon or counterfeit cartridge may be in use. Close: Press
OK(P
. 563)
Cartridge Comm. Error Problems caused by non-Canon cart. not covered by warranty. Close: Press
OK(P
. 563)
Change the authentication password.(P. 564)
Check the authentication settings.(P. 564)
Could not connect.(P. 564)
Could not connect. Check the encryption key settings.(P. 564)
Could not connect. Max connections to access point reached(P. 564)
Could not connect using the wireless LAN.(P. 565)
Could not connect using WPS.(P. 565)
Could not detect any connections from wireless devices.(P. 565)
Could not perform cleaning.(P. 566)
Could not perform IEEE 802.1X authentication. Cannot analyze the authentication server certicate.
(P
. 566)
Could not perform IEEE 802.1X authentication. Change the authentication password.(P. 566)
Could not perform IEEE 802.1X authentication. Check the authentication settings.(P. 566)
Could not perform IEEE 802.1X authentication. Congur
e the correct authentication information.(P. 566)
Could not perform IEEE 802.1X authentication. Congur
e the information required for authentication.
(P. 566)
Could not perform IEEE 802.1X authentication. No reply from the destination.(P. 567)
Could not perform IEEE 802.1X authentication. The authentication server certicate has e
xpired.(P. 567)
Could not perform IEEE 802.1X authentication. The authentication server certicate is incorr
ect.(P. 567)
Could not perform Open System auth. Chk encryp. key set.(P. 567)
Could not perform Shared Key auth. Chk encryp. key set.(P. 567)
Device will restart to connect using Easy Connection via PC. Is it OK?(P. 568)
Direct Connection terminated.(P. 568)
Easy Conn. via PC ended due to timeout Device will restart.(P. 568)
Encryption key is not set correctly. Check the encryption key settings.(P. 568)
End of Cart. Lifetime(P. 569)
IEEE 802.1X error. Cannot analyze auth. server certicate.(P
. 569)
IEEE 802.1X error. Change the auth. password.(P. 569)
IEEE 802.1X error. Check the auth. settings.(P. 570)
IEEE 802.1X error. Congur
e correct authentication info.(P. 570)
IEEE 802.1X error. Congur
e the info. required for auth.(P. 570)
IEEE 802.1X error. No reply from the destination.(P. 570)
IEEE 802.1X error. The auth. server cert. has expired.(P. 569)
IEEE 802.1X error. The auth. server cert. is incorrect.(P. 569)
Incorrect number of characters/invalid characters entered.(P. 570)
Low Cartridge Level(P. 570)
Troubleshooting
560