Canon imageCLASS MF273dw - Specifying Destinations (Touch Panel Model)

Specifying Destinations (Touch Panel Model)
94LS-03J
When sending fax
es, specify destinations using the method below.
Specifying Destinations
Using the Address Book
Specify a destination r
egistered to the Address Book of the machine.
Specifying Destinations (Address Book) (Touch Panel Model)(P. 162)
Dir
ectly Entering a Destination
Enter the destination using the keyboard or numeric keys on the operation panel.
Specifying Destinations (Direct Input) (Touch Panel Model)(P. 164)
Using the TX Job Log
Y
ou can call up the TX Job Log of fax jobs and specify destinations that were specied in the past.
Specifying Destinations (TX Job Log) (Touch Panel Model)(P. 165)
Specifying Multiple Destinations
You can specify multiple destinations by repeating the operation of specifying a destination.
When Remo
ving a Specic Destination after Specifying Multiple Destinations
Use the following procedure:
On the fax screen, press [Destination] [Conrm/Edit] select the destination or group to remove
[Remove] [Yes].
If you selected a group, you can press [Number of Destinations] to view the destinations registered to that
gr
oup. You cannot individually remove destinations registered to a group.
Conrming Destinations
The screen for conrming whether a specied destination is corr
ect may be displayed depending on the
settings of the machine.
In addition, the method for specifying destinations may be restricted, and sending may be restricted to only
specic destinations.
Preventing Sending Data by Mistake and Leaking Information(P. 324)
Basic Operations
161