Canon imageCLASS MF273dw - The Machine Connected Via WSD Port Is Not Displayed During Driver Installation

The Machine Connected via WSD Port Is Not Displayed
During Driver Installation
94LS-0F5
T
roubleshoot by checking the items below.
Check the Settings of the Machine.
Congure the settings belo
w if they have not been congured.
The machine must be restarted to apply the settings.
WSD Printing and Multicast Discovery Settings
Log in to Remote UI in System Manager Mode [Settings/Registration] [Network Settings] [WSD
Settings] [Edit] select the [Use WSD Printing] and [Use Multicast Discovery] checkboxes [OK] restart
the machine.
On the operation panel, select [Menu] in the [Home] screen, and then select [Preferences] to congur
e the
settings.
[WSD Settings](P. 398)
Check the OS Network Settings.
Congure the settings belo
w if they have not been congured.
In Windows, click [ ] (Start) [ ] (Settings) [Network & Internet] [Status] [Change connection
pr
operties]
[Network pr
ole]
[Private]
Check Whether the Driver Is Installed.
Use the following procedure to check whether the driver of the machine is displayed.
In Windows, click [ ] (Start) [ ] (Settings) [Devices] [Printers & scanners] check whether the
driver is displayed.
If the driver is displayed, it is installed. In this case, uninstall the driver, and then reinstall it.
For details about uninstalling and installing drivers, see the driver manual at the online manual site.
https://oip.manual.canon/
Troubleshooting
525