Canon imageCLASS MF273dw - Managing the Machine

Restricting Use of Remote UI
94LS-08X
While Remote UI is convenient for oper
ating the machine from a computer, it also poses a risk of third-party access to
the machine.
You can congure the setting to require users to enter a PIN (Remote UI Access PIN) when using Remote UI to prevent
unauthorized access by a third party.
If you do not use Remote UI, it is recommended that you disable the function.
Setting the PIN to Use for Remote UI(P. 338)
Disabling Remote UI(P. 339)
Setting the PIN to Use for Remote UI
Y
ou can restrict the use of Remote UI to only those users who know the Remote UI Access PIN.
This section describes how to congure the settings using the operation panel.
You can also congure the settings using Remote UI from a computer after the Remote UI Access PIN has been set on
the machine.
Managing the Machine from a Computer (Remote UI)(P. 349)
Administr
ator privileges are required.
Touch Panel Model(P. 338)
5 Lines LCD Model(P. 338)
◼ T
ouch Panel Model
1
On the operation panel, press [Menu] in the [Home] screen.
[Home] Screen(P. 113)
2
Press [Management Settings] [Remote UI Settings/Update Firmware] [Remote UI
Settings] [Remote UI Access Security Settings].
➠ The [RUI Access Security] screen is displayed.
If the login screen appears, enter the System Manager ID and PIN, and then press [Log In]. System
Manager ID and PIN(P
. 5)
3
Set [Remote UI Access Security Settings] to [On], enter the Remote UI Access PIN, and
pr
ess [Apply].
4
Enter the same number, and press [Apply].
➠ The settings ar
e applied.
◼ 5 Lines LCD Model
1
On the operation panel, select [Menu] in the [Home] screen, and press
. [Home]
Scr
een(P. 113)
Security
338