Canon imageCLASS MF273dw - Page 348

2
Press [Management Settings]
[Remote UI Settings/Update Firmware]
[Remote UI Settings] [Remote UI Access Security Settings] .
➠ The [RUI Access Security] scr
een is displayed.
If the login screen appears, enter the System Manager ID and PIN, and then press
. System Manager
ID and PIN(P
. 5)
3
Set [Remote UI Access Security Settings] to [On], enter the Remote UI Access PIN, and
pr
ess
.
4
Enter the same number, and press .
➠ The settings are applied.
When [Management Settings] of the Settings Menu Is Initialized
● Use the settings menu on the oper
ation panel to reset the Remote UI Access PIN.
[Remote UI Access
Security Settings](P. 456)
Disabling Remote UI
You can disable Remote UI to reduce the risk of unauthorized access to the machine via the network.
Use the operation panel to congure the settings. You cannot congure the settings using Remote UI from a
computer.
Administrator privileges are required. The machine must be restarted to apply the settings.
Touch Panel Model(P. 339)
5 Lines LCD Model(P. 340)
◼ T
ouch Panel Model
1
On the operation panel, press [Menu] in the [Home] screen.
[Home] Screen(P. 113)
2
Press [Management Settings] [Remote UI Settings/Update Firmware] [Remote UI
Settings] [Remote UI Access Security Settings].
➠ The [Use Remote UI] scr
een is displayed.
If the login screen appears, enter the System Manager ID and PIN, and then press [Log In].
System
Manager ID and PIN(P
. 5)
3
Set [Use Remote UI] to [Off].
Security
339