Canon imageCLASS MF273dw - Setting the Department ID and PIN for the Administrator

Setting the Department ID and PIN for the
Administr
ator
94LS-07F
Set the System Manager ID and System Manager PIN to cr
eate an administrator account.
By creating an administrator account, only those users who know these credentials can log in to System Manager
Mode to view and change important settings.
System Manager ID and PIN(P. 5)
This section describes ho
w to congure the settings using the operation panel.
You can also congure the settings using Remote UI from a computer after the System Manager ID and PIN have been
set on the machine.
Managing the Machine from a Computer (Remote UI)(P. 349)
Administr
ator privileges are required.
Touch Panel Model(P. 302)
5 Lines LCD Model(P. 302)
◼ T
ouch Panel Model
1
On the operation panel, press [Menu] in the [Home] screen.
[Home] Screen(P. 113)
2
Press [Management Settings] [User Management] [System Manager Information
Settings].
➠ The [Sys. Manager Info Set.] screen is displayed.
If the login screen appears, enter the currently set System Manager ID and PIN, and then press [Log In].
3
Press [System Manager ID and PIN], enter the System Manager ID, and press [Apply].
Specify any number. You cannot set a System Manager ID consisting of all zeros, such as "00" or "0000000."
4
Enter the System Manager PIN, and press [Apply].
Specify any number other than "7654321." You cannot set a PIN consisting of all zeros, such as "00" or
"0000000."
5
Enter the PIN again, and press [Apply].
➠ The settings ar
e applied.
◼ 5 Lines LCD Model
1
On the operation panel, select [Menu] in the [Home] screen, and press
. [Home]
Scr
een(P. 113)
2
Press [Management Settings]
[User Management] [System Manager
Information Settings] .
Security
302