Canon imageCLASS MF273dw - [Fax Settings] (Touch Panel Model)

[Fax Settings] (Touch Panel Model)
94LS-0AW
Specify the settings for sending fax
es.
* Values in bold red text are the default settings for each item.
* [Fax Settings] may not be displayed depending on the model, the installed options, and other settings.
[Change Default Settings](P. 436)
[Off-Hook Alarm](P. 436)
[ECM TX](P. 436)
[Set Pause Time](P. 437)
[Auto Redial](P. 437)
[Check Dial Tone Before Send](P. 437)
[Set Line](P. 438)
[TX Start Speed](P. 438)
[Conrm Enter
ed Fax Number](P. 438)
[Allow Fax Driver TX](P. 439)
[Use Address Book When On-Hook](P. 439)
[Restrict Sequential Broadcast](P. 439)
[Register Log Dest to Addr Book](P. 439)
[TX Terminal ID](P. 439)
[Auto Adjust VoIP Comm. Speed](P. 440)
[Change Default Settings]
[Menu] [Function Settings] [Send] [Fax Settings]
Change the default settings for sending Fax
es.
Changing the Default Settings(P. 167)
When you pr
ess [Reset] in the fax send screen, the settings revert to the values specied here.
[Resolution]
[200 x 100 dpi (Normal)]
[200 x 200 dpi (Fine)]
[200 x 200 dpi (Photo)]
[200 x 400 dpi (Superne)]
[Density]
9 le
vels
[Sharpness]
7 levels
[Off-Hook Alarm]
[Menu] [Function Settings] [Send] [Fax Settings]
Adjust the volume of the alarm tone sounded when a telephone is connected and the receiver or handset is left
off the hook.
● Dr
agging the slider to the right increases the volume.
● Dragging the slider to the far left mutes the sound.
4 levels
[ECM TX]
[Menu] [Function Settings] [Send] [Fax Settings]
Settings Menu Items
436