Canon imageCLASS MF273dw - Preparing to Send and Receive Faxes

Preparing to Send and Receive Faxes
94LS-05Y
T
o send and receive faxes with the machine, you must use the operation panel (Fax Setup Guide) to congure the
initial settings. You cannot congure the initial settings using Remote UI from a computer.
Conguring the Fax
Settings (Fax Setup Guide) (T
ouch Panel Model)(P. 95)
When Sending Faxes from a Computer
You must make the necessary preparations on each computer used to send faxes.
Preparing to Send Faxes from a Computer(P. 221)
T
o Change the Initial Settings
You can change the settings congured with Fax Setup Guide individually.
Changing Fax RX Mode and Setting the Action when Receiving a Fax(P. 223)
Changing the Fax Number and Unit Name(P. 225)
● The sender
's information, including the sent date and time and fax number of the machine, is printed
together with the fax data at the destination. You can change the print position and the mark added to the
fax number or choose to not print this.
[TX Terminal ID](P. 439)
● T
o automatically forward or save received faxes, you must congure separate settings.
Forwarding Faxes
and Conguring the Backup Settings(P
. 226)
Faxing
220