Canon imageCLASS MF273dw - Changing the Report and List Print Settings

Changing the Report and List Print Settings
94LS-09F
Reports and lists ar
e printed on paper on one side by default. You can change the setting to print on both sides. You
can also change the setting to automatically print communication results reports.
Use the operation panel to congure the settings. You cannot congure the settings using Remote UI from a
computer.
Touch Panel Model(P. 362)
5 Lines LCD Model(P. 363)
Touch Panel Model
1
On the operation panel, press [Menu] in the [Home] screen.
[Home] Screen(P. 113)
2
Press [Output Rprt.] [Report Settings].
➠ The [Report Settings] scr
een is displayed.
3
Change the report and list print settings.
To Print Reports and Lists on Both Sides
1
Press [Default Settings for Report Output].
➠ The [Default Settings for Report Output] scr
een is displayed.
2
Set [2-Sided Printing] to [On].
To Change the Communication Management Report Settings
1
Press [Communication Management Report].
➠ The [Comm. Mngt. Report] scr
een is displayed.
2
Congure the r
eport settings.
● To print automatically after every 40 communication events, set [Auto Print (40 Transmissions)] to
[On].
● To congure the settings to print sending and saving results and receiving results in a different
format, set [Separate TX/RX] to [On].
To Change the Fax TX Result Report Settings
1
Press [Fax TX Result Report].
➠ The [Fax TX Result Report] scr
een is displayed.
2
Select whether to print this report automatically.
Managing the Machine
362