Canon imageCLASS MF273dw - Verifying a Received Certificate with OCSP

Verifying a Received Certicate with OCSP
94LS-08A
Online Certicate Status Pr
otocol (OCSP) is a protocol for inquiring to an OCSP responder (server that supports OCSP)
about the revocation status of a certicate received from a certicate authority.
You can congure the settings to verify the validity of a certicate that the machine receives from a certicate
authority, using the OCSP.
Congure these settings using Remote UI from a computer. You cannot use the operation panel to congure the
settings.
Administrator privileges are required.
1
Log in to Remote UI in System Manager Mode.
Starting Remote UI(P. 350)
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of
Remote UI(P. 352)
3
Click [Device Management] [OCSP (Online Certicate Status Pr
otocol) Settings]
[Edit].
➠ The [Edit OCSP (Online Certicate Status Pr
otocol) Settings] screen is displayed.
4
Select the [Use OCSP (Online Certicate Status Pr
otocol)] checkbox.
5
Set the certicate verication le
vel and the OCSP responder.
[Certicate V
erication Level]
Set whether to validate the certicate even if its revocation status cannot be conrmed, such as when the
machine is unable to connect to an OCSP responder.
[OCSP Responder Settings]
Specify the URL of the OCSP responder.
[Custom URL]
When [Use Custom URL] or [Use Certicate URL (Use Custom URL If Certicate URL Cannot Be Retrieved)] is
selected, enter the URL of the OCSP responder.
[Communication Timeout]
Enter the time from search start to timeout in seconds.
6
Click [OK].
➠ The settings ar
e applied.
7
Log out from Remote UI.
Security
323