[Generate File]
94LS-0AF
Specify the settings for scan le gener
ation.
* Values in bold red text are the default settings for each item.
[Output File Image Settings](P. 420)
[Output File Image Settings]
[Menu] [Function Settings] [Common] [Generate File]
Specify the gamma value used when a scan le is converted to Y
CbCr for transmission.
Setting a gamma value that matches that of the display used by the recipient ensures that image display is faithful to
the original.
[YCbCr TX Gamma Value]
[Gamma 1.0]
[Gamma 1.4]
[Gamma 1.8]
[Gamma 2.2]
● For information on the display
’s gamma value, see the manual for the display.
Settings Menu Items
420
To Next Page
Loading...
