Canon imageCLASS MF273dw - Orientation for Loading Paper with a Logo

Orientation for Loading Paper with a Logo
94LS-030
When loading paper with a logo, pay attention to the orientation and which side is face up.
By default, the orientation the paper is to be loaded and the side to print on vary depending on whether you want to
print on one or both sides.
Printing on One Side of Paper with a Logo(P. 138)
Printing on Both Sides of Paper with a Logo(P. 138)
● For the gener
al procedure of loading paper, see the following:
Loading Paper in the Paper Drawer(P. 134)
● Y
ou can congure the settings so that the orientation the paper is to be loaded and the side to print on do
not change depending on whether you want to print on one or both sides. When this setting is congured,
load the paper using the 2-sided printing method.
[Switch Paper Feed Method](P. 417)
Printing on One Side of Paper with a Logo
Load the paper with the logo side (side to be printed) face up.
Paper with logo in portr
ait orientation
Paper with logo in landscape orientation
Printing on Both Sides of Paper with a Logo
Load the paper with the logo side (side to be printed rst) face do
wn.
Paper with logo in portrait orientation
Basic Operations
138