Canon imageCLASS MF273dw - [Network]

[Network]
94LS-09X
Specify the settings for the machine
’s network environment.
* Values in bold red text are the default settings for each item.
[Select Wired/Wireless LAN](P. 387)
[Wireless LAN Settings](P. 387)
[Direct Connection Settings](P. 387)
[Easy Connection via PC](P. 388)
[TCP/IP Settings](P. 388)
[SNMP Settings](P. 388)
[Dedicated Port Settings](P. 389)
[Dedicated Port Authentication Method](P. 389)
[Waiting Time for Connection at Startup]
(P
. 389)
[Ethernet Driver Settings](P. 389)
[IEEE 802.1X Settings](P. 390)
[Firewall Settings](P. 390)
[RMT-SW](P. 390)
[Initialize Network Settings](P. 391)
[Select Wired/Wireless LAN]
[Menu] [Preferences] [Network]
Set whether to connect the machine to the network using a wir
ed or wireless LAN.
Selecting Wired or Wireless
LAN(P
. 52)
* If you are switching from a wired LAN to a wireless LAN, you can make the change within the procedure for
conguring the wireless LAN.
[Wir
ed LAN]
[Wireless LAN]
[Wireless LAN Settings]
[Menu] [Preferences] [Network]
Specify the settings for connecting the machine to a wir
eless LAN and to save energy while the machine is connected
to a wireless LAN.
[Wireless LAN Settings](P. 392)
[Direct Connection Settings]
[Menu] [Preferences] [Network]
Specify the settings for using a dir
ect connection and for the connection function.
Enabling the Direct Connection
Function
(P. 282)
[Use Direct Connection]
[Off]
[On]
[Time Until Dir
ect Connection Termination]
0 (Off)
1 to 60 (min.)
[Access Point Mode Settings]
[Use Custom SSID]
Settings Menu Items
387