Canon imageCLASS MF273dw - Connecting to a Wireless LAN by Entering a PIN Code (WPS PIN Code Mode)

Connecting to a Wireless LAN by Entering a PIN Code
(WPS PIN Code Mode)
94LS-01C
When the wir
eless LAN router supports WPS PIN code mode, you can establish a connection by registering a PIN code
generated on the machine to the wireless LAN router. Use a computer to register the PIN code.
Administrator privileges are required to connect to a wireless LAN.
Required Preparations
● Access the wir
eless LAN router from a computer, and enable registration of a WPS PIN code.
* For details on how to register a WPS PIN code, see the manual of your wireless LAN router.
Touch Panel Model(P. 60)
5 Lines LCD Model(P. 61)
Touch Panel Model
1
On the operation panel, press [Wireless LAN Set.] in the [Home] screen.
[Home]
Screen(P. 113)
➠ The [Select Network] screen is displayed.
● If the login screen appears, enter the System Manager ID and PIN, and then press [Log In]. System
Manager ID and PIN(P
. 5)
● If the message [Enable the wireless LAN?] appears, press [Yes].
● If the message [Cannot nd the access point.] appears, press [Close].
2
Press [Other Connections].
3
Press [WPS PIN Code Mode].
➠ A PIN code is gener
ated.
Once this screen is displayed, you must register the WPS PIN code to the wireless LAN router within 10
minutes.
4
Access the wireless LAN router from a computer, and register the WPS PIN code to
the r
outer.
Setting Up
60