Canon imageCLASS MF273dw - Selecting Wired or Wireless LAN

Selecting Wired or Wireless LAN
94LS-017
Set whether to connect the machine to the network using a wir
ed or wireless LAN.
If you want to switch from wired LAN to wireless LAN, you can make the setting during the procedure for connecting
to wireless LAN.
Connecting to a Wireless LAN(P. 55)
* Y
ou cannot connect to a wired LAN and wireless LAN at the same time.
Use the operation panel to congure the settings. On the operation panel, you can also congure the settings by
pressing [Menu] in the [Home] screen
[Preferences]. You cannot congur
e the settings using Remote UI from a
computer.
Administrator privileges are required.
Touch Panel Model(P. 52)
5 Lines LCD Model(P. 52)
Touch Panel Model
1
On the operation panel, press [Menu] in the [Home] screen.
[Home] Screen(P. 113)
2
Press [Preferences] [Network] [Select Wired/Wireless LAN].
If the login screen appears, enter the System Manager ID and PIN, and then press [Log In]. System
Manager ID and PIN(P
. 5)
3
Select [Wired LAN] or [Wireless LAN].
➠ The message [Settings congur
ed.] appears.
Next, connect to the wired or wireless LAN.
Connecting to a Wired LAN(P. 54)
Connecting to a Wireless LAN(P. 55)
When Switching between Wired and Wireless LAN
● Any installed drivers must be uninstalled and then r
einstalled.
For details about uninstalling and installing drivers, see the driver manual at the online manual site.
https://oip.manual.canon/
5 Lines LCD Model
1
On the operation panel, select [Menu] in the [Home] screen and press
. [Home]
Scr
een(P. 113)
2
Press [Preferences]
[Network] [Select Wired/Wireless LAN] .
Setting Up
52