Canon imageCLASS MF273dw - Setting the Date and Time

Setting the Date and Time
94LS-095
Set the date and time for the machine. The date and time set her
e are used as the reference for the functions using
date and time information, and therefore, they need to be set accurately.
This section describes how to congure the settings using Remote UI from a computer.
On the operation panel, select [Menu] in the [Home] screen, and then select [Preferences] to congure the settings.
[Timer/Energy Settings](P. 384)
1
Log in to Remote UI.
Starting Remote UI(P. 350)
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of
Remote UI(P
. 352)
3
Click [Timer Settings]
[Edit].
➠ The [Edit Timer Settings] scr
een is displayed.
4
Enter the current date and time.
5
Set the time zone according to the region where the machine is used.
Communicating over the Internet is premised on setting the UTC (Coordinated Universal Time) correctly. The
UT
C is a coordinated universal time that is standard for all parts of the world. There is a time difference
depending on the country or region where the machine is used.
6
Set daylight saving time as needed.
● Select the [Use Daylight Saving Time] checkbo
x if the machine is in a country or region with daylight saving
time, and then set the start and end dates.
7
Click [OK].
➠ The settings ar
e applied.
8
Log out from Remote UI.
Managing the Machine
348