Canon imageCLASS MF273dw - Configuring the Fax Settings (Fax Setup Guide) (Touch Panel Model)

Conguring the Fax Settings (Fax Setup Guide) (T
ouch
Panel Model)
94LS-022
When you pr
ess [Fax] in the [Home] screen on the operation panel for the rst time, the screen (Fax Setup Guide) for
setting the items so as to use the fax is displayed. Congure the fax settings using the procedure below by following
the instructions on the screen.
The machine must be restarted to apply the settings congured with the Fax Setup Guide.
Step 1: Starting the Fax Setup Guide(P. 95)
Step 2: Registering the Fax Number and Unit Name(P. 95)
Step 3: Setting the RX Mode(P. 96)
Step 4: Connecting to Telephone Line(P. 97)
Step 1: Starting the Fax Setup Guide
1
On the operation panel, press [Fax] in the [Home] screen.
[Home] Screen(P. 113)
➠ The [Fax Setup Guide] scr
een is displayed.
When the [Fax Setup Guide] Screen Is Not Displayed
If the [Fax Setup Guide] scr
een is not displayed after pressing [Fax] in the [Home] screen, or to reset the fax
with the Fax Setup Guide, use the following procedure to display the [Fax Setup Guide].
[Home] screen on the operation panel [Menu] [Function Settings] [Common] [Fax Setup Guide].
2
Press [Set Up Now] [Next].
➠ The [Register Unit Tel. No.] screen is displayed.
Step 2: Registering the Fax Number and Unit Name
Register the fax number and unit name (name or company name). This information is printed together with the fax
data at the destination.
1
On the [Register Unit Tel. No.] screen, enter the fax number of the machine, and
pr
ess [Apply].
➠ After the message [Settings applied.] appears, the scr
een guiding you to register the unit name is
displayed.
2
Press [Next].
➠ The [Register Unit Name] scr
een is displayed.
3
Enter the name or company name, and press [Apply].
Setting Up
95