Canon imageCLASS MF273dw - Cannot Print (Wired LAN)

Cannot Print (Wired LAN)
94LS-0FK
T
roubleshoot by checking the items below.
Is the Printer Port of the Computer Congured Correctly? (Windows)
Change the settings if they have not been congur
ed correctly. If there is no available port, add a new port.
Viewing the Printer Port(P. 597)
Conguring a Printer Port (Windo
ws)(P. 178)
Can You Access Remote UI?
If you cannot access Remote UI, the r
ewall settings of the machine may be incorrect, preventing
communication with the computer.
Use the following procedure to disable the rewall settings with the operation panel, and then use Remote UI to
congure the rewall again.
Administrator privileges are required. The machine must be restarted to apply the settings.
Touch Panel Model(P. 538)
5 Lines LCD Model(P. 538)
Touch Panel Model
1
Disable the r
ewall settings.
To Disable IPv4 Address Filter
[Home] screen on the operation panel [Menu] [Preferences] [Network] [Firewall Settings]
[IPv4 Address Filter] [Outbound Filter] or [Inbound Filter] [Off] Restart the machine.
To Disable IPv6 Address Filter
[Home] screen on the operation panel [Menu] [Preferences] [Network] [Firewall Settings]
[IPv6 Address Filter] [Outbound Filter] or [Inbound Filter] [Off] Restart the machine.
To Disable MAC Address Filter
[Home] screen on the operation panel [Menu] [Preferences] [Network] [Firewall Settings]
[MAC Address Filter] [Outbound Filter] or [Inbound Filter] [Off] Restart the machine.
2
Congure the r
ewall correctly.
Setting the Firewall(P. 305)
5 Lines LCD Model
1
Disable the r
ewall settings.
To Disable IPv4 Address Filter
[Home] screen on the operation panel [Menu] [Preferences] [Network]
[Firewall Settings] [IPv4 Address Filter] [Outbound Filter] or [Inbound Filter]
[Off] Restart the machine.
To Disable IPv6 Address Filter
Troubleshooting
538