[On]
[Set Line]
[Menu] [Function Settings] [Send] [Fax Settings]
Specify the machine
’s fax number, unit name, and the number of lines.
* The fax number and unit name are sent to the recipient as sender information.
[TX Terminal ID](P. 439)
[Register Unit T
elephone Number]
[Menu] [Function Settings] [Send] [Fax Settings] [Set Line]
Register the fax number of the machine. Changing the Fax Number and Unit Name(P. 225)
[Register Unit Name]
[Menu] [Function Settings] [Send] [Fax Settings] [Set Line]
Register the name (unit name) sent to the other party
.
Changing the Fax Number and Unit Name(P. 225)
[Select Line T
ype]
[Menu] [Function Settings] [Send] [Fax Settings] [Set Line]
If the machine is connected to a Private Br
anch Exchange (PBX) or to a line that is shared with a home phone or
business phone, the line type may not be selected automatically. If so, select [Manual] and specify the line type.
* Normally, if you connect the machine to a phone line and restart the machine, the line type is selected
automatically.
Conguring the Fax Settings (Fax Setup Guide) (T
ouch Panel Model)(P. 95)
[Pulse]
[T
one]
[TX Start Speed]
[Menu] [Function Settings] [Send] [Fax Settings]
It may tak
e some time for transmission to begin due to factors such as a poor phone line connection. If this occurs,
adjust the initial communication speed to a lower level.
[33600 bps]
[14400 bps]
[9600 bps]
[7200 bps]
[4800 bps]
[2400 bps]
[Conrm Enter
ed Fax Number]
[Menu]
[Function Settings] [Send] [Fax Settings]
Specify whether a scr
een for re-entering the number appears when you enter a fax number using the numeric keys.
Conrming the Destination befor
e Sending(P. 327)
[Off]
[On]
Settings Menu Items
438
To Next Page
Loading...
