Canon imageCLASS MF273dw - [Adjustment;Maintenance]

Specify whether to use the LPD protocol. Conguring LPD
, RAW, or WSD(P. 343)
If the LPD protocol is used, you can also set the time from the start of reception standby, after print data reception is
canceled, to the timeout.
[LPD Print Settings]
[Off]
[On]
[RX Timeout]
1 to 5 to 60 (min.)
[RAW Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings]
Specify whether to use the RA
W protocol.
Conguring LPD
, RAW, or WSD(P. 343)
If the RAW protocol is used, you can also set the time from the start of reception standby, after print data reception is
canceled, to the timeout.
[RAW Print Settings]
[Off]
[On]
[RX Timeout]
1 to 5 to 60 (min.)
[WSD Settings]
[Menu] [Preferences] [Network] [TCP/IP Settings]
Specify whether to use the WSD pr
otocol. You can specify this setting for each of the functions that use the WSD
protocol.
Conguring LPD
, RAW, or WSD(P. 343)
[WSD Print Settings]
[Use WSD Print]
[Off]
[On]
[Use WSD Br
owsing]
[Off]
[On]
[Use Multicast Discovery]
[Off]
[On]
[WSD Scan Settings]
[Use WSD Scan]
[Off]
[On]
[Use Computer Scan]
[Off]
[On]
Settings Menu Items
398