Canon imageCLASS MF273dw - Page 269

2
Press [On]
.
➠ The cop
y screen reappears.
Adjusting the Density
Y
ou can adjust the density to suit the original when copying.
If text or images in the original are too faint or dark, adjust the density of the entire original.
To create clean copies of an original with a colored background or a newspaper, adjust the density of the background.
1
Press [Density] on the copy screen
.
➠ The [Density] screen is displayed.
2
Adjust the density.
Adjusting the Density of the Entire Original
Select [Density], mo
ve the slider to the left or right to adjust the density, and press
.
Set [+] to incr
ease the density and [-] to lower it.
Adjusting the Density of the Background
1
Press [Background]
.
➠ The [Backgr
ound] screen is displayed.
2
Select the adjustment method, and press
.
[Auto]
An optimal density for the original is automatically set.
[Original T
ype] is automatically set to [Text].
[Adjust (Manual)]
Drag the slider to the left or right to adjust the density, and press
.
Pr
ess [+] to increase the density and [-] to lower it.
● When you adjust the density of the backgr
ound, parts other than the background may also be affected.
Adjusting the Image Quality
Y
ou can adjust the image quality such as when the copied image is not clear or the text is dicult to read. You can also
erase dark borders and shadows that appear around the edges of the original when copying.
* Erase Frame is not available when making copies using the ID Card Copy function.
Copying
260