Canon imageCLASS MF273dw - Page 328

Enter the items as needed using single-byte alphanumeric characters.
[Common Name]
Enter the name of the certicate subject as needed using single-b
yte alphanumeric characters. This
corresponds to the Common Name (CN).
7
Click [OK].
➠ The [Ke
y and Certicate Signing Request (CSR) Details] screen is displayed.
8
Click [Store in File] to save the CSR le to a computer.
9
Log out from Remote UI.
10
Submit the application with CSR le attached to the certicate authority
.
● When the CSR is gener
ated, the key is registered to the machine, but it cannot be used until the certicate
issued by the certicate authority is registered.
Registering a Certicate Issued b
y a Certicate Authority to a Key
Register the certicate using Remote UI from a computer. You cannot use the operation panel to register it.
Administrator privileges are required.
1
Log in to Remote UI in System Manager Mode.
Starting Remote UI(P. 350)
2
On the Portal page of Remote UI, click [Settings/Registration]. Portal Page of
Remote UI(P
. 352)
3
Click [Device Management]
[Key and Certicate Settings].
➠ The [Ke
y and Certicate Settings] screen is displayed.
4
Click the key name (or certicate icon) to which to r
egister the certicate.
Security
319