Canon imageCLASS MF273dw - Page 376

Updating the Firmware via the Internet
Use the operation panel to update the rmware via the Internet. You cannot update it using Remote UI from a
computer.
Administrator privileges are required. When the rmware has been updated, the machine restarts automatically.
Required Preparations
● Connect the machine to the Internet.
Setting Up the Network(P. 50)
1
On the operation panel, select [Menu] in the [Home] screen. [Home] Screen(P. 113)
2
Press [Management Settings] [Remote UI Settings/Update Firmware] [Update
Firmwar
e].
➠ The [Update Firmware] screen is displayed.
If the login screen appears, enter the System Manager ID and PIN, and then click [Log In].
System
Manager ID and PIN(P. 5)
3
Press [Via Internet] [Yes].
➠ The rmwar
e update conrmation screen is displayed.
4
In the licensing screen, press [Accept].
5
Press [OK].
➠ Do
wnloading of the rmware starts.
When the download is complete, the machine restarts automatically, and the rmware is updated.
● Do not turn OFF the machine until the r
estart is complete.
Updating the Firmware via a Computer
Update the rmwar
e from a computer connected to the machine via wired LAN or USB.
Required Preparations
● Do
wnload the latest rmware from the Canon website for your country/region to the computer performing
the update.
https://global.canon/en/support/
Managing the Machine
367