[Off]
[On]
[Envelope Flap Closing Prevention]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing] [Special Paper
Pr
ocessing]
Depending on the type of envelope and the operating environment, the envelope ap may stick down during
printing. If so, specifying [On] in this setting may reduce the likelihood of envelope aps sticking down.
* If this is set to [On], the print may be faded because the toner is not fully xed on the paper.
[Off]
[On]
[Paper Curl Correction]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing] [Special Paper
Pr
ocessing]
Depending on paper used, the paper may curl during printing. If so, specifying [On] in this setting may alleviate
paper curling.
* Specifying [On] in this setting may lead to faded print.
[Off]
[On]
[Reduce Ppr. Sticking at Output]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
In 2-sided printing involving multiple pages, printed paper sheets may stick together. If so, specifying [On] in this
setting may r
educe the likelihood of paper sheets sticking together.
* This setting is also effective for 1-sided printing.
[Off]
[On]
[High Humidity Mode]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Printing in a high-humidity envir
onment may cause uneven print density. If so, specifying [On] may improve the print
results.
* Specifying [On] in this setting may lead to blurred images and/or text in low-humidity environments.
[Off]
[On]
[Low Humidity Mode]
[Menu] [Adjustment/Maintenance] [Adjust Image Quality] [Special Processing]
Settings Menu Items
410
To Next Page
Loading...
