Canon imageCLASS MF273dw - Page 437

[Auto Error Skip]
[Menu] [Function Settings] [Printer] [Printer Settings]
Specify whether to continue printing if an err
or occurs during printing.
It is recommended that the [Off] setting normally be used so that printing stops when an error occurs.
[Off]
[On]
[Timeout]
[Menu] [Function Settings] [Printer] [Printer Settings]
Specify the time fr
om the start of waiting to receive print data until reception times out when print data reception is
interrupted.
5 to 15
to 300 (sec.)
[UFR II]
[Menu] [Function Settings] [Printer] [Printer Settings]
Specify the print data pr
ocessing method used when the UFR II Printer Driver is used.
[Halftones]
[Menu] [Function Settings] [Printer] [Printer Settings] [UFR II]
Specify the print method used to r
eproduce halftones (intermediate areas between light and dark areas)
according to the print data content.
To print at high denition with clear text outlines
Specify [Resolution]. This is useful for printing les with text and ne lines.
To print at a higher resolution than the [Resolution] setting, specify [High Resolution]. This is useful for
printing data with ne lines and small text, such as CAD les.
* Selecting [High Resolution] may reduce the consistency of textures.
To print with highlighted contrast between light and dark areas
Specify [Color Tone]. This is useful for printing image les such as photos.
To print with smoother gradations and outlines
Specify [Gradation]. This is useful for printing les such as gures that use tonal gradations.
[Resolution/Gradation]
*1
[Text]
[Resolution]
[Color Tone]
[Gradation]
[High Resolution]
[Graphics]
[Resolution]
[Color Tone]
[Gradation]
[High Resolution]
Settings Menu Items
428