[Reduce RX Size]
[Menu] [Function Settings] [Receive/Forward] [Fax Settings]
Specify whether to reduce images when printing or saving received faxes.
● Set the r
eduction ratio to [Auto] in this setting to reduce images to t the paper size.
● When specifying the reduction ratio, set a value between [97%] and [75%].
● To maintain the aspect ratio in reduced images, set the reduction direction to [Vertical/Horizontal]. To reduce
images in the vertical direction only, specify [Vertical Only].
[Off]
[On]
[Reduction Ratio]
[Auto]
[97%]
[95%]
[90%]
[75%]
[Reduction Dir
ection]
[Vertical/Horizontal]
[Vertical Only]
[Forwarding Settings]
[Menu] [Function Settings] [Receive/Forward] [Fax Settings]
Specify the settings for forwar
ding faxes.
Auto Forwarding and Backing Up Received Faxes(P. 227)
[Enable Forwar
ding Settings]
[Menu] [Function Settings] [Receive/Forward] [Fax Settings] [Forwarding Settings]
Specify whether the content of r
eceived faxes is automatically forwarded or saved to a preset destination.
If you specify [On] in this setting, also specify the forwarding or save destination and, if needed, the le name.
[Off]
[On]
[Forwar
ding Destination]
[File Name]
[Print Images]
[Menu] [Function Settings] [Receive/Forward] [Fax Settings] [Forwarding Settings]
Specify whether to print forwar
ded faxes.
You can also opt to print only faxes that cannot be forwarded.
[Off]
[On]
[Only When Err
or Occurs]
Settings Menu Items
446
To Next Page
Loading...
