Canon imageCLASS MF273dw - Page 510

[Home] on the operation panel [Menu] [Function Settings] [Common] [Paper Feed Settings]
[Switch Paper Feed Method] [Drawer 1] [Print Side Priority]
5 Lines LCD Model
[Home] on the operation panel [Menu] [Function Settings] [Common] [Paper
Feed Settings] [Switch Paper Feed Method] [Drawer 1] [Print Side Priority]
* When you select [Print Side Priority], the printing speed for 1-Sided printing will decrease.
T
ry using Output Adjustment Mode
Setting [Output Adjustment Mode] to [On] may solve the problem.
T
ouch Panel Model
[Home] on the operation panel [Menu] [Function Settings] [Printer] [Printer Settings] [Print
Quality] [Output Adjustment Mode] [On]
5 Lines LCD Model
[Home] on the operation panel [Menu] [Function Settings] [Printer] [Printer
Settings] [Print Quality] [Output Adjustment Mode] [On]
* When you select [On], the printing speed may decrease.
Step 5: Checking the Maintenance Status
Have You Cleaned the Fixing Assembly?
These symptoms may occur when the xing assembly is dirty
. In this case, clean the xing assembly.
Cleaning the Fixing Assembly(P. 468)
Troubleshooting
501