Is the Machine Installed in a Location Subject to Strong Wind Such as from an Air
Conditioner?
If so, adjust the air direction and volume of the air conditioner.
If that does not work, setting [Switch Paper Feed Method] to [Print Side Priority] may impr
ove the problem.
Touch Panel Model
[Home] on the operation panel [Menu] [Function Settings] [Common] [Paper Feed Settings]
[Switch Paper Feed Method] [Drawer 1] [Print Side Priority]
5 Lines LCD Model
[Home] on the operation panel [Menu] [Function Settings] [Common] [Paper
Feed Settings] [Switch Paper Feed Method] [Drawer 1] [Print Side Priority]
* When you select [Print Side Priority], the printing speed for 1-Sided printing will decrease.
Step 3: Checking the Special Processing Setting
Is [Special Processing] Enabled?
If so, setting [Special Processing] below to [Off] may improve the problem. [Special Processing](P. 409)
● [Reduce Ppr. Sticking at Output]
● [Env
. Flap Closing Prevention]
● [Paper Curl Correction]
Touch Panel Model
[Home] screen on the operation panel [Menu] [Adjustment/Maintenance] [Adjust Image Quality]
[Special Processing]
5 Lines LCD Model
[Home] screen on the operation panel [Menu] [Adjustment/Maintenance] [Adjust Image
Quality] [Special Processing]
Troubleshooting
511
To Next Page
Loading...
