Canon imageCLASS MF273dw - Page 55

and then establish a connection according to the connection type. For the standards and procedure, see the
follo
wing:
Connecting to a Wireless LAN(P. 55)
Step 5: Conguring Settings for Toner Replenishment Service
You can congure settings for toner replenishment service. Through toner replenishment service, new toner
cartridges are automatically delivered to you before your existing toner cartridges are used up.
* Use of the toner replenishment service requires prior registration with select retailers. This service is only available in
certain countries.
* This service can be set up through [Toner Delivery Set.] displayed on the [Home] screen. [Home] Screen(P. 113)
1
On the conrm scr
een of toner replenishment service, press [Next].
2
Press [Accept].
If you press [Do Not Acpt.], the settings congured in the Setup Guide are applied.
When you exit the Setup Guide, the [Home] screen is displayed.
[Home] Screen(P. 113)
3
Press [Close].
➠ The settings congur
ed in the Setup Guide are applied.
When you exit the Setup Guide, the [Home] screen is displayed.
[Home] Screen(P. 113)
● If connecting to the server fails, try conguring the settings again thr
ough [Connect to Server/Verify
Connection] in [Toner Delivery Set.].
[Home] Screen(P. 113)
Setting Up
46