Canon imageCLASS MF273dw - Page 85

When Using a Stateless Address
Select the [Use Stateless Addr
ess] checkbox.
When Using a Manual Address
Select the [Use Manual Addr
ess] checkbox, and enter the IP address, prex length, and default router
address.
* You cannot enter a multicast address (address starting with "ff").
When Using a Stateful Address
Select the [Use DHCPv6] checkbo
x.
6
Click [OK].
7
Restart the machine.
Restarting the Machine(P. 106)
➠ The settings ar
e applied.
Perform a connection test to check whether the IPv6 address is correctly congured.
Checking the
Network Status and Settings(P
. 89)
If the IP Address Is Changed after Installing the Printer Driver
● Y
ou must add a new port.
Adding a Port(P. 178)
Setting Up
76