The following settings are available for the output profile.
Setting Details
Auto (Color) Performs the optimum color conversion from the input image data color space information
(sRGB, Adobe RGB), media settings etc. You should normally select these settings.
Auto (Monochrome Photo) Performs the best color conversion to monochrome from the input image data color space in-
formation (sRGB, Adobe RGB), media settings etc.
None (No Color Correction) You cannot perform color conversion with a plug-in. This is useful for creating an original ICC
profile.
External ICC Profiles This selects printer ICC profiles to be output to ICC profiles saved in the OS standard folder.
Use the color space of the input data as well as the select ICC profile to perform color conver-
sion.
Important
• To use an ICCv4 profile, you must install AdobeCMM or use Print Plug-In in a Windows Vista or later environment.
For details on installing Adobe CMM, refer to "Using Adobe CMM" ➔ P.258 .
Note
• Auto (Monochrome Photo) can only be selected for the corresponding media types.
•
Proof
This is displayed when an ICC profile is selected as the Output Profile.
When this is checked, you can perform printing press simulation prints.
Refer to "Perform Printing Press Simulation Print" ➔ P.262 for details on printing press simulation prints.
•
Matching Method
You can select the processing method when performing color conversion.
The following settings are available for the matching method.
Setting Details
Perceptual This converts the image to an image with natural color balance and gradation. This is useful for
pictures.
Saturation This converts the image to an image with heightened color saturation. The color balance of
pictures and drawings may change.
Relative Colorimetric This converts the image with emphasis on color balance before the conversion or on visual
color balance. This is useful for pictures and drawings.
Absolute Colorimetric No mapping of colors to destination white point is performed. This is suitable for proofing to
simulate the output of a particular device. Note that black point compensation does not function
if you are using Adobe CMM.
Note
• When the Output Profile you have set is Auto (Monochrome Photo) or None (No Color Correction), you cannot
select a matching method.
•
ICC Conversion Options button
This is displayed when an ICC profile is selected as the Output Profile.
When this button is clicked, the ICC Conversion Options dialog box is displayed allowing you to configure
color conversion related settings.
Refer to "ICC Conversion Options dialog box" ➔ P.246 for details on ICC Conversion Options.
•
Copies
You can input the number of print copies in numerical characters.
Note
• The maximum value is 99.
• You can change the numbers by clicking either ▲ or ▼.
•
Set Configuration
button
Clicking the button opens the Set Configuration dialog box that provides settings for the adjustment of image
sharpness and image enlargement method.
Main Sheet
iPF8400S
User's Guide
Windows Software Print Plug-In for Photoshop / Digital Photo Professional
234
To Next Page
Loading...
