Canon IPF8400S - Gray Adjustment

Note
• You can also click the up or down arrow, or enter the number directly to increase or decrease the value.
Gray Adjustment
Gray Adjustment
You can set the gray adjustment.
Adjusting Monochrome (Photo)
Sets monochrome printing for black-and-white photo image data captured with a scanner or digital camera.
1 Select Monochrome (Photo) on Color Mode in the Color Settings panel.
2
Select Gray Adjustment.
3 Click the Color Balance list and select the color settings.
Setting Details
Cool Black Adjusts cool black (blue tones) to gray.
Pure Neutral Black Adjusts to neutral gray.
Warm Black Adjusts warm black (red tones) to gray.
Note
• To perform the adjustments, drag the X or Y slide bar left and right.
• You can also click the up or down arrow, or enter the number directly to increase or decrease the value by X
and Y.
4 Drag each slider to the left or right to adjust.
Setting Details
Tone You can adjust the brightness of intermediate tones in an image. Selecting Hard tone gives
a hard impression with more definition. Selecting Soft tone gives a soft impression.
Brightness Adjusts the brightness of the entire image. When the results of the printout are brighter than
the original images such as the original photo before scanning and graphics created on the
display, or when you want to print in different degrees of brightness, use this feature.
iPF8400S
Gray Adjustment
User's Guide
Mac OS Software Preview
349